FRAVEBOT

Greenhouse diagnostics · rail monitoring

Find twisted rails before a trolley does.

Harvesting trolleys carry hundreds of kilograms metres above the rail. Scout maps rail twist across the greenhouse while it scouts.

FRAVEBOT Scout on the main path next to the pipe rails under high-wire tomatoes
Row 275 · 87.4 m13.2 mm twist · criticalover 12 mm · fix first
Measured on every driveevery row, updated with each pass
Every spot locatedrow and metre for every spot, worst first
Warning and criticalset your own limits, 8 / 12 mm by default
No extra sensorsit uses data the robot already records

What you get

Know which rails to fix, before something goes wrong.

  • Know which rails to fix firstEvery twisted spot with its row and metre, the worst and fastest-growing on top.
  • Plan repairs for the end of the seasonFix critical spots right away and keep the rest on a watch list until the crop is out.
  • See if a spot is getting worseEach pass updates the twist, so you see a spot grow before it becomes critical.
Greenhouse map of track twist along rows 265 to 290 with critical spots marked in red and 8–12 mm sections in yellow, next to the Track condition panel: 5 critical rows, 9 warning, 5 within limits, and a list of spots to fix with twist in mm and the daily trend
Track condition across the greenhouse, late October – early November 2026: 19 rows measured, 5 critical, 9 in the warning band, 5 within limits. On the right, the spots to fix, worst and fastest-growing first, with how many days until a spot reaches 12 mm.

In the application

Every pass on top of each other

One row in Rail Analyzer. The light lines are individual passes, the dark line is their mean. Where they lie on top of each other, the measurement is repeatable: within 0.5 mm of twist over a 3 m base and 0.3 mm of cross level, about 25× smaller than the defects we look for.

Rail view in the FRAVEBOT application for row 270: twist over 3 m along the row from 15 passes, the mean, a ±2σ band and single passes, amber warning and red critical zones, numbered spots, and on the right the key figures and the 12 most twisted spots with their trend
Row 270, 23 Oct – 5 Nov: maximum twist 13.1 mm at 89.8 m from 15 passes (8 forward, 7 back), and the 15 passes lie almost exactly on top of each other. 3.8 m of rail above the 8 mm warning level and 0.5 m above 12 mm. Noise between passes: 0.34 mm for twist, 0.24 mm for cross level. On the right, the 12 most twisted spots and whether each is steady or changing.

Inspection checklist

Print the list, send someone where it matters

Everything is in the application. When it is time to act, print the list of spots: critical ones to check first, warnings to plan, each with its row, the metres to look at and the maximum twist.

The maintenance worker ticks off each spot and writes a note, so you know what was found and fixed.

Inspection checklist for 23 October to 5 November 2026, 19 rows measured: 5 critical spots to check first and 20 warnings to plan, each with row, metres, maximum twist, number of passes and a line for a note
The printable checklist: 5 critical spots to check first and 20 to plan, each with row, metres and maximum twist.

One map

On the same map as your crop

Rail spots are not a separate system. They sit on the greenhouse map next to new pest places and fruit defects, so one look tells the team where to send the grower and where to send maintenance.

Greenhouse map in the FRAVEBOT application: rows 265 to 290 coloured critical, needs a look, fine or no recent scan, with critical track spots next to pests far above usual, new pest places, fruit defects and FRAVEye traps along the main path
The greenhouse map in the application, rows 265–290: critical rail spots sit next to new pest places, pests far above usual, fruit defects and the FRAVEye traps, so one walk can cover all of them.

Where it ends

  • Only defects longer than about 1.5 m are measured reliably.
  • Rail height is relative along the row, not absolute.
  • We have verified repeatability, not yet accuracy against a reference survey.

What's next

  • A standard part of Scout: every greenhouse that wants it can have it switched on.
  • Gutters and hoses: the next parts of greenhouse diagnostics, from the same drives.
  • Accuracy checked against a reference survey of the rails.

Same drive, more answers

The same drive does more

No extra hardware and no extra route. The robot is already driving every row, so the same drive can answer more questions about your greenhouse.

Pests & diseases A map of the places that need your eyes, fresh every morning, with the photo of every find. See how it works → Yield forecasting & fruit counting Every fruit counted by colour and turned into kg/m² 7 and 14 days ahead, with a range. See how it works → Crop registration Apex growth, internodes and head thickness for every plant in the measured sections, every day. See how it works → Labour control Side shoots left on the stem, leaves not removed and missed picking, row by row. See how it works →

Already running Scout? Rail monitoring is available on request.

It uses data your robot already records, so no extra hardware is needed. Ask us and we switch it on for your greenhouse.

Map your rails with Scout