FRAVEBOT

Pests & diseases · daily maps for high-wire crops

Catch pests and diseases early, and treat only where needed.

A fresh map every morning, with a photo of every find.

Three metres of a tomato row as Scout's cameras saw it, top to bottom, with every leaf mould find marked
Close-up of the find: a tomato leaf with leaf mould inside the detection boxRow 269 · 92.4 m · todayLeaf mould · 100 % sure21.4 °C · 92 % RH – favours leaf mould
TipLower humidity, check rows 268–270
Every plant checkedpests and diseases detected on every plant, not a sample
In the app in 20 mineach find is analysed and visible within 20 minutes of the scan
History of every spotsee how symptoms develop and spread from scan to scan
WhatsApp alertsan instant alert if something is seriously wrong, otherwise a weekly report

What Scout finds

Real finds from the robot's cameras

Each photo is a find as Scout saw it in a commercial greenhouse, with the box the model drew.

Tomato and pepper

On leaves and stems · 9

  • Real Scout find: a leaf with a leaf miner tunnel, marked by the model
    Leaf miner
  • Real Scout find: holes eaten into pepper leaves, marked by the model as caterpillar damage
    Caterpillar damage
  • Real Scout find: a leaf with spider mite damage, marked by the model
    Spider mite
  • Real Scout find: a tomato leaf with tomato russet mite damage, marked by the model
    Tomato russet miteAculops lycopersici
  • Real Scout find: a tomato leaf with leaf mould (Passalora fulva), marked by the model
    Leaf mouldPassalora fulva
  • Real Scout find: a tomato leaf with powdery mildew, marked by the model
    Powdery mildew
  • Real Scout find: a pale, chlorotic tomato leaf, marked by the model
    Chlorosis
  • Real Scout find: yellow foxglove aphid damage on a pepper leaf, marked by the model
    Foxglove aphidAulacorthum solanipepper
  • Real Scout find: a stink bug nymph (Nezara) between pepper fruits, marked by the modelReal Scout find: a stink bug nymph (Nezara) on a pepper leaf, marked by the modelReal Scout find: a stink bug nymph (Nezara) on a pepper fruit, marked by the model
    Stink bug, nymph stagesNezarapepper

On fruit · 4

  • Real Scout find: blossom end rot on a green tomato, marked by the modelReal Scout find: blossom end rot on a red pepper, marked by the model
    Blossom end rottomatopepper
  • Real Scout find: botrytis on a ripening tomato, marked by the modelReal Scout find: an infected spot on a red pepper, marked by the model
    Fruit infectione.g. Botrytis cinereatomatopepper
  • Real Scout find: a defect on a ripe tomato, marked by the model
    Fruit defecttomato
  • Real Scout find: pale sunscald patches on two green peppers, marked by the model
    Sunscaldpepper

Rare diseases are hard to find in real photos. We train for them in our digital twin first, so the robot knows them before they reach your greenhouse. Flying pests on sticky traps are covered by FRAVEye.

How it works

From the robot's photos to your morning map

  1. Step 1Scout photographs every plantThe robot drives every row on its own and photographs each plant from foot to head.
  2. Step 2AI marks pests and symptomsEvery photo is checked for 13 pests and diseases. Each find keeps its row, metre and height.
  3. Step 3 · the resultMorning alerts, map any timeEach morning you get what changed since the last scan. The map in the app shows the whole greenhouse whenever you need it.See the map below
Pest map of rows 265 to 290: coloured patches for leaf mould, chlorosis and other pests, pulsing dots where a pest is far above usual, NEW labels for new places, and FRAVEye sticky traps along the main path
The pest map, rows 265–290, fresh every morning. Click a place to see it on the plants.

How to read the map

Only the places that changed

Not every find, only where a pest is above what is usual for that spot.

  • Far above usualWell above normal for this place. Look here first.
  • New placeClean in the two scans before.
  • One colour per pestLeaf mould, chlorosis, spider mite and more.
  • Darker = further above usualThe stronger the colour, the bigger the jump.
  • Not scanned for 7+ daysThe map is not fresh here.
  • Sticky trapsFRAVEye traps, for flying pests.

From the map to the leaf in two clicks

Open a place on the map and you see three metres of the row as the cameras saw it, top to bottom, with every find marked. Pick one and the close-up shows exactly what the system found.

A row section from 89 to 94 metres shown camera by camera from the top of the plant to its foot, with marked finds, and a close-up of one leaf with buttons to confirm or reject the find
Row 269, 89–94 m, camera by camera from the top of the plant to its foot. In this section: leaf miner 7, caterpillar damage 54, spider mite 2, leaf mould 44 and chlorosis 2 finds. Right: the close-up of one find, with “Right” and “Wrong find” to teach the model.

Also in the application

Is the pest growing, and does the climate help it?

Trend per pest

Finds per m² over the last scans, and how much they changed.

Trend per pest: spider mite 1.96 per square metre, change minus 7 percent; Passalora fulva 0.70 per square metre, up 32 percent; chlorosis 0.43 per square metre, down 33 percent

Climate link

Finds are put next to your own climate data: temperature, humid hours and VPD. For each pest you see whether the last two weeks suited it.

  • Falling although the climate suits it: your control works.
  • Rising although the climate does not suit it: look for a source, such as new plants or a hotspot.
Climate link for the last two weeks: for caterpillar damage, spider mite, leaf mould and chlorosis, the change in percent, whether the climate favours it and what to check
Capture on a phone: a pepper leaf with aphids, cut out and described FRAVEBOT Capture · capture.fravebot.com Help Scout see further Capture makes Scout better. Your team photographs finds in places Scout does not reach, and every confirmed photo goes into our datasets, so Scout learns to recognise more. Your team also gets an identification back in seconds. See how Capture works →

Where it ends

  • A find is a pointer to a place, not a diagnosis. Your scout or pathologist confirms it.
  • Scout finds a problem once it can be seen from the path, so a symptom deep in the canopy may show only on a later pass. The robot cannot turn a leaf, so eggs or young larvae on the underside of a leaf that faces the path with its top side stay hidden, and so do single mites. Your scouts still catch those by hand.

Same drive, more answers

The photos that find pests do more

No extra hardware and no extra route. The robot is already driving every row, so the same pictures plan your harvest, measure your crop and check your rails.

Yield forecasting & fruit counting Every fruit counted by colour and turned into kg/m² 7 and 14 days ahead, with a range. See how it works → Crop registration Apex growth, internodes and head thickness for every plant in the measured sections, every day. See how it works → Greenhouse diagnostics A daily map of twisted rail sections, with the spots to fix first. See how it works → Labour control Side shoots left on the stem, leaves not removed and missed picking, row by row. See how it works →

Put the robot's map next to your scout's notes

Scout maps pests and diseases in every row, every day. Tell us about your greenhouse and we prepare an offer.

Map your pests with Scout